14 December 2005

G -3 MGA REMOTE CONTROL

G-3 MGA GEARBOX REMOTE CONTROL

Fits: All MGAs 1956-1962 including Coupe and Twin Cam

Each remote has been totally disassembled including removal of the reverse lockout plunger. The housings were sandblasted, surfaced, and then tumbled to give a very fresh and smooth appearance. The original pins which held the gearlever from rotation were replaced by 1/4-28 bolts to allow for easy replacement of the lever. The bodies were align reamed, bronze bushings fitted, and new shafts provided. The selectors are zinc plated. These are really very nice rebuilt assemblies which can restore your loose gearlever to a far more positive feeling!

Instructions for fitting are included.

G-3 MGA Gearbox Remote Control $180

Core charge for each remote control is $25. The core MUST be returned in original box for credit!

Order by phone, fax, or email. Our site is not yet set for on-line ordering.

posted by John Twist  # 10:21 PM   

F-03 MGA/MGB SLAVE CYLINDER

F-03/O With Original Steel ring around boot
F-03/W With twisted wire around boot

Fits: MGA through MGB, 1956 through 1980

Each cylinder has been thoroughly cleaned, glassbeaded, tumbled, honed, and inspected for bore condition. The line and bleeder threads have been chased. The bleeder threads have been chased, the bore and cross drilling cleaned and both the bleeder and piston have been zinc plated. The cylinders have been rebuilt with original Locheed rebuild kits (KL 71525). Instructions for fitting and bleeding are included.

F-03/O $70
F-03/W $60

Core charge for each cylinder is $10. The core MUST be returned in original box for credit.

Order by phone, fax, or email. Our website does not yet support on-line ordering

posted by John Twist  # 10:11 PM   

M-04 MGB BRAKE PRESSURE FAILURE SWITCH ASSEMBLY

M-04 MGB/Midget Pressure Failure Switch Assembly

Fits MGB 1968 → 1974; Midget 1968 → 1979

Each assembly has been thoroughly cleaned, glassbeaded, tumbled, honed, and inspected. The six threads have been chased. New O rings have been fitted. The fittings have been zinc plated. Allen set screws have been fitted to the threaded openings to prevent contamination. Instructions for fitting and bleeding are included in each box.

List Price $70.00

Core charge for each assembly is $10. The core MUST be returned in original box for credit.

Call, fax, or email to order. We are not yet set up for on-line ordering.

posted by John Twist  # 10:13 AM   

Archives

December 2005